Repair Old windows Glass

replacing them with new, energy-efficient windows can be significantly expensive. Homeowners who are not ready to invest in new windows can curb energy loss by improving the efficiency of existing windows.

Begin by checking for air infiltration or leakage around the window frames. Windows that no longer have a flush, gap-free installation can allow hot or cold air to flow freely into or out of the home. A careful inspection can uncover gaps and cracks that allow warm or cold air to leave or enter the house. One method for detecting gaps between the sash panel and the window framee is to shut the window on a piece of paper. If the paper that pulls out without tearing, the window is no longer airtight and leaks energy.

Air leaks can be corrected inexpensively with weather stripping and caulk.  Installing new weather stripping seals the area around the windows, while caulking fills holes and cracks in places where different building materials join. These two materials usually pay for themselves within one year of application.

Silicone, latex, acrylic latex silicone blend and butyl rubber caulking are all useful for filling holes and cracks. First, any old caulk or sealant must be removed with a putty knife or solvent to allow the new caulk to adhere properly. The new caulk should be applied to joints in the frame and the joint between frame and wall when outdoor temperature exceeds 45 degrees Fahrenheit and humidity is low.

Weather stripping consists of narrow strips of vinyl, metal, rubber, foam or felt that are installed around the frame to seal gaps. Pressure-sensitive, adhesive-backed foam is inexpensive, easy-to-apply and can last one to three years. Reinforced foam, attached to metal or wood strips, works well against air infiltration produced by wind gusts, but it can be difficult to install.

Another easy method of preventing winter heat loss and summer heat gain is the installation of insulating shades, shutters and heavy, lined drapes. Homeowners might want to consider folding fabric shades made of cells specifically designed to trap air. These shades provide excellent insulation.

Installing window films

Window films are another easy-to-apply, cost-effective way to reduce energy loss. Some films reflect sunlight, blocking heat transmission into the home, while others prevent interior heat loss. These films also protect furniture, carpets and wood surfaces from fading from UV rays. The films are available in a number of appearances from reflective, mirror-like finishes to darker tint to those that are completely transparent, which leaves exterior views unaffected.

Films are generally made of polyester or thin plastic applied to the window's interior by homeowners or glued to the surface by professional installers. Tinted window films admit less light than other types of film, which may increase the need for artificial lighting.

Reflective window films contain a metal oxide coating that blocks sunlight and creates a mirror effect outside during the day. Low-emissivity window films, on the other hand, admit certain portions of visible light and block others. Their metallic coatings can be adapted for either heat resistance or heat retention.

Installation typically involves cleaning the window thoroughly, spraying it with a special window film solution, cutting and fitting the film and removing air bubbles. The application itself is not difficult, but it requires time, patience and a steady hand. 

Read more »

Repair Flat Tire by self

De tire plug metoade fan reparaasjes bannen is in mysterieuze saak. De earste kear dat jo sjogge ien ynstallearre bringt gefoelens fan fernuvering en twifel. Jo binne fernuvere dat it hâlden lucht mar twifelje dat duorret mear as in dei of twa. It feit is dat in goede bân reparaasje sil foar ivich. Wêrom moatte jo it ferfange ien fan dyn bannen mei folslein goede tread krekt omdat in spiker dûnse syn wei yn dyn libben?

Foar likernôch $ 5 en 5 minuten fan dyn libben, kinne jo jaan in deade tire in nij lease op it libben troch it brûken fan in mienskiplike tire plug. It is krekt te maklik oan foarby omheech.
Nea besykje te plug in sidewall! Jo tire fan sidewall is ûnder ferskillende stammen en druk as it diel dat makket kontakt mei de dyk. Plugging in sidewall kin resultearje yn in blowout, dus net besykje it.

In leaky tire kin ride dy nuten. Slow lekkage binne benammen irritant. Hiel stadich lekkage? Dat binne de slimste. Jo folje jo tire, check it, check it, check it. Ta beslút jo beslute dat miskien dy wienen kinst it lek, of dat it ferlear in bytsje druk troch kâld waar of in fergelykber ferskynsel. It is dan en pas dêrnei dat de band begjint om fiele leech wer. Sa jo folje it, wer. As jo ​​auto is foarsjoen fan in Tire Luftdruck Management System of TPMS it kin wêze noch mear maddening as faak sels de minste feroaring yn tire druk sil ta in beam fol warskôging lichten op jo dash board.
As jo ​​tire hat in stadige lek, en jimme binne wurch fan it spyljen fan spultsjes mei it, kin nedich in nije bân. Mar foardat jo it ferfange, hawwe jo tire kontrolearre op trage lekkage. Faak in lytse spiker of puncture kin wêze genôch om dat de stadige lek. Lytse punctures as dit kin wurde reparearre mei in tire plug yn de measte gefallen. Tire Plugs binne amper in nije útfining. De tried en wiere plug - in diel fan de sterke snoer coated mei rubbery tar - is yn gebrûk foar desennia en hat bewiisd tige betrouber. De ienige nadeel foar in tradisjonele tire plug is de ynstallaasje is it rommelich Plugs, it dreech te brûken ark, en de krêft nedich om it allegear barre.
In tradisjonele tire plug bart as dit: Earste jo sykje it gat of bûtenlânske foarwerp ynsletten yn it tsjil. Fuortsmite it foarwerp, dan nimme de reaming ark en triuwe lit, dat yn it gat om it grutter en rougher. Folgjende jo thread de gooey tar plug troch de reus nulle en triuwe lit, it gat ding sa hurd as jim kinne troch de puncture. Pull it út en jo ha in fersegele tire.

It liket maklik genôch, mar it is rommelich, en de reaming en shoving nedich in soad krêft!
De Dynaplug systeem fertrout op itselde prinsipe as de âlde bân Plugs, mar leauwe my doe't ik sis jo dat is in revolúsje. Wy wiene skeptyske as wy earst iepene it pakket. Der wiene in pear bekende foarmen, mar gone wie de reaming ark, en de Plugs sels net sjen rjochts. It systeem seach in bytsje te slick te krijen it smoarge wurk fan tire plugging dien. Mar jongen wiene wy ​​ûngelyk oer dat. It ferlies fan de reaming ark wie mear as wolkom, it is ien fan de meast dreech te brûken dielen fan de âlde bân plugging dea ups. De nij ûntwurpen Plugs binne lyts genôch dat der gjin needsaak om te iepenjen de puncture hâlden oant in gruttere omfang. De folgjende ferbettering is yn it laden fan de plug yn de plugging ark. De âlde Plugs wiene plakkerig en dreech te squeeze troch it ynstekken fan ark. It wie sa dreech om harren goed Threaded dat wy faak verspild plug nei plug besocht te krijen harren yn dêr. Dynaplug biedt in flotter, skjinner ienfâldiger plug. It is noch wearing in lichte coating fan adhesive om derfoar te soargjen dat it bliuwt in plak as it dwaan fan syn wurk as band plug, mar it is oer 1/3 sa dik as de âlde plug, en net hast as gooey. Fierder, streamen it yn 'e ark is sa simpel as it ynstekken fan de ein fan de plug yn in gat oan de ein fan' e ark. Fierwei de grutste ferbettering oer it âlde ark is de hanneling fan it ynstekken de plug yn 'e bân. Dêr't de âlde plugging tool moast wurde letterlik striden yn 'e tire puncture tank foar it feit dat jo wiene besykje te triuwe lit, in stik ark, en op dat punt in optearde plug yn it gat. It wie tige dreech, en faak resultearre yn ús noaten om werom nei de reaming ynstrumint om de puncture gat in bytsje grutter. 

Dynaplug echt spikere de ferbettering yn dit gebiet. De fernijde plug hat in metaal tip. Dizze metaal tip is oan 'e ein dat wurdt ynfoege yn' e bân, en fungearret as in skerpe liedende râne te begelieden de plug yn plak. It giet yn sa folle makliker as de âlde plug. Wy ha it mei help fan dy foar in skoft no (as yn jierren!) En hawwe hie grutte resultaten.

Read more »

Repair SD Card top trick point by self

Ora, la scheda non si nota affatto con qualsiasi smartphone Android o computer. Ma il mio Blackberry Curve vede la carta e dice che c'è un problema e che non si può leggere la scheda.

Ho un 16 GB Classe 4 scheda SD in dotazione con il mio smartphone Droid X. Stavo ripristino del telefono e nella paura dei miei dati sulla scheda perdersi, ho tirato. Non durante l'avvio, ma il telefono era su.
che fare per rendere questa carta di 16 GB utilizzabile nuovo ::
ci sono altri strumenti da utilizzare per formattare schede SD
mUSBfixer Format Write-Protected USB

http://ketopc.blogspot.fr/2012/05/musbfixer-format-write-protected-usb.html
SD formatter
https://www.sdcard.org/downloads/formatter_3/
hp format tools
http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml
one of the best tools made specifically for memory cards is the following:
https://www.sdcard.org/downloads/formatter_3/

Read more »

Repair Teeth with braces by self

If you discover one of your brackets has broken, follow these steps to ensure it can get fixed with no complications.

What's the Damage?

First, check to see if the wire is still attached to the bracket. If so, leave it in place. If it's attached but sticking out, press it gently back into position using a cotton swab. Use orthodontic wax to hold the broken bracket in place in your mouth until you can arrange to see your orthodontist.

If the bracket has come loose, remove it if you can easily and bring it with you to the orthodontist for reattachment.

Take Control

Review the state of the wires from the broken braces bracket. According to Marlo Miller, DDS, you should clip overlong or protruding wires very carefully with a pair of nail clippers and as close as possible to your teeth. Press any extra length back into position against the tooth and cover with wax to prevent it from cutting the inside of your mouth or cheeks.

Book an Appointment

Make an appointment with your orthodontist to have the bracket repaired. The urgency for seeing your specialist depends on how much discomfort you're experiencing and the degree of damage. Notify him or her as to whether you have the parts of the bracket with you. This will enable your orthodontist to be prepared to fix the bracket during your appointment.

Interim Measures

While you wait for the appointment, rinse your mouth regularly with salt water to promote healing, and eat soft foods such as boiled eggs, yogurt and fresh breads to avoid doing further damage to the bracket. Avoid hard, crunchy foods such as apples, raw carrots and even sticky candies.

Read more »

How to Eye muscle repair top tips

How to Eye muscle repair top tips : Eye muscle repair is surgery to correct eye muscle problems that cause strabismus (crossed eyes).The goal of this surgery is to restore the eye muscles to a proper position. This will help the eyes move correctly.

Eye muscle surgery is most often done on children. However, adults who have similar eye problems may also have it done. Children will most often have general anesthesia for the procedure. They will be asleep and will not feel pain.

Depending on the problem, one or both eyes may need surgery.

After the anesthesia has taken effect, the eye surgeon makes a small surgical cut in the clear tissue covering the white of the eye. This tissue is called the conjunctiva. Then the surgeon will locate one or more of the eye muscles that needs surgery. Sometimes the surgery strengthens the muscle, and sometimes it weakens it.

• To strengthen a muscle, a section of the muscle or tendon may be removed to make it shorter. This step in the surgery is called a resection.
• To weaken a muscle, it is reattached to a point farther toward the back of the eye. This step is called a recession.

The surgery for adults is similar. In most cases, adults are awake, but are given medicine to numb the area and help them relax.

When the procedure is done on adults, an adjustable stitch is used on the weakened muscle so that minor changes can be made later that day or the next day. This technique often has a very good outcome.

Strabismus is a disorder in which the two eyes do not line up in the same direction. Therefore, the eyes do not look at the same object at the same time. The condition is more commonly known as "crossed eyes."

Surgery may be recommended when strabismus does not improve with glasses or eye exercises.

Risks for any anesthesia are:

• Reactions to anesthesia medicines
• Breathing problems

Risks for any surgery are:

• Bleeding
• Infection

Some risks for this surgery include:

• Wound infections
• Damage to the eye (rare)
• Permanent double vision (rare)

Your child's eye surgeon may ask for:

• A complete medical history and physical exam before the procedure
• Orthoptic measurements (eye movement measurements)

Always tell your child's doctor or nurse:

• What drugs your child is taking
• Include any drugs, herbs, or vitamins you bought without a prescription
• About any allergies your child may have to any medicines, latex, tape, soaps or skin cleaners

During the days before the surgery:

• About 10 days before the surgery, you may be asked to stop giving your child aspirin, ibuprofen (Advil, Motrin), warfarin (Coumadin), and any other blood thinners.
• Ask your child's doctor which drugs your child should still take on the day of the surgery.

On the day of the surgery:

• Your child will often be asked not to drink or eat anything for several hours before the surgery.
• Give your child any drugs your doctor told you to give your child with a small sip of water.
• Your child's doctor or nurse will tell you when to arrive for the surgery.
• The doctor will make sure your child is healthy enough for surgery and does not have any signs of illness. If your child is ill, the surgery may be delayed.

The surgery does not need an overnight stay in the hospital most of the time. The eyes are most often straight right after surgery.

While recovering from the anesthesia and in the first few days after surgery, your child should avoid rubbing their eyes. Your surgeon will show you how to prevent your child from rubbing their eyes.

After a few hours of recovery, your child may go home. You should have a follow-up visit with the eye surgeon 1 to 2 weeks after the surgery.

To prevent infection, you will probably need to put drops or ointment in your child's eyes.

Eye muscle surgery does not fix the poor vision of a lazy (amblyopic) eye. Your child may have to wear glasses or a patch.

In general, the younger a child is when the operation is performed, the better the result. Your child's eyes should look normal a few weeks after the surgery.

Next : Repair of cross-eye; Resection and recession; Strabismus repair; Extraocular muscle surgery

Read more »

Repair Stopwatch top point

OBVIOUSLY you can't just start turning screws...there are a number of things you will need to do (and get) in preparation.  You will have much better results, and a much more enjoyable experience if you take the time, effort, and expense to get most of the items listed below BEFORE starting.  Keep in mind that these are just the bare essentials... a serious repair person has hundreds of other specialized tools... but we'll save that for another discussion.  The bottom line is that preparation and having the right equipment is vital to success of any repair job!.

Workspace

Set up a well lit workspace with a clean, flat surface.  For a beginner a kitchen table will do just fine, but as you become more serious you may want to consider a watchbench made specially for repairing watches and a good fluorescent lamp which is easier on the eyes.  A watchbench has small built in drawers for all of the tools and parts you are sure to accumulate over time.  The design is tall, with a surface that (when sitting) is close to the face so the repair person doesn't have to slump over when working.  Some repairmen will put cork or linoleum on the surface.  These soft materials stop parts from bouncing away, and aren't hard enough to damage anything dropped on them.  Some benches even have a slide out "parts catcher" that presses against the belly when sitting.  Mine is a wood frame with a loose piece of canvas tacked to the bottom.  When a part is dropped and goes "over the edge", this brilliant contraption catches it!  

Most beginners will (as mentioned above) begin at a kitchen table.  A good tip for working at a table is to lay down a fine piece of white fabric (like a plain white pillowcase or cheesecloth) to do your work on.  The main advantage for doing this is if you drop one of the parts, it won't bounce away and become lost.  I suggest white because tiny screws (etc.) are easy to locate.  This practice will also save your table from scratches, and protect your watch from the tables hard surface.  To keep it from shifting, you might want to consider taping it down with masking tape as well.

​Screw-driver set

You WILL need a good set of watchmakers screwdrivers. This is a MUST. The sets found at the department store for working on eyeglasses etc. will cause more trouble than they are worth. They are not precision made and you will easily damage or strip the highly polished screws found in most watches. The keen eye of a serious watch collector will pick this up immediately; it detracts from the look of the watch thus reducing value of your watch. Track down and buy a set of watchmakers screwdrivers. Even a beginners set will be much better than anything you can find at the dollar-store.

​The proper way to hold it (Right Below) is to grip the screwdriver shaft between the thumb and middle finger, with the index finger on the cupped end (which rotates). Press down on the top of the screwdriver and swivel it between your thumb and middle finger; turning the screw.

Parts Tray

You will also need a place to put your parts as you remove them from the watch. Don't get in the bad habit of placing parts on the table or bench (trust me on this one!) you are bound to lose something. I would highly recommend a common (inexpensive) flip top tackle box. Get one with 8 to 12 sections. They are available in most department stores. An empty egg carton will also do just fine, but will flip easily sending parts flying, so be careful. Simply place the parts in order from left to right as you remove them from the watch. When it is time to reassemble, just go in reverse order and you will know what part is supposed to go next. Numbering the compartments is a good idea to make absolutely sure you are going in proper order. The parts trays shown here are great if you have more than one job going at once- they are compact and stack-able...

Tweezers

Get a good pair of fine tweezers. Removing and returning small parts without tweezers is nearly impossible without them. It will take a while to master this skill... use a soft grip... hold something too tight and the part will ricochet around the room... Tweezers are available at the department store, but not nearly as accurate as a good set you will eventually want fine quality watchmakers tweezers.

Cleaning Supplies

If you get really serious about this hobby, you will definitely want to buy a mechanical or ultrasonic parts cleaner and specially designed parts solution. You can buy the old bulky mechanical ones on Ebay for a few hundred $$ and the solution costs about $50 per Gallon. The ultrasonic machines are more expensive. Both machines use the same liquids. This is definitely the way to go if you get really serious about the hobby.

When I first began this hobby at the kitchen table I used Naphtha. Naphtha can be found in most hardware stores. I have found that it works very well and evaporates leaving almost no residue. Simply pour a tiny, tiny bit into a small cup and soak your parts for a few minutes. Then brush between gears and in jewel holes with a small coarse tipped paintbrush, or eyelash brush. Once you are satisfied the part is clean, remove it from the solution, place it on filter paper which absorbs most of the fluid. The remaining fluid simply evaporates leaving a clean part. Use a blower to quicken the dry time.

Read more »

Car Scratch Repair Fast

On the surface, a scratch repair pen might seem like a great idea. What’s not to like about making quick repairs to your car’s finish by simply drawing a line along the damage? It turns out, the results aren’t always like what you see on TV.

For one thing, our testers found they don’t work on anything but minor surface scratches. And, they may make the damage look worse.

Marketed as an easy way to avoid expensive auto body shop bills, manufacturers say that anyone can get professional results from the pens, which cost $10 or less. We sampled three to see if the claims were true.

What we tested

The Simoniz Fix it Pro ($10), DuPont Pro Fusion Color ($8), and Turtle Wax Scratch Repair Pen ($10) are all widely available online or in auto parts stores. Claimed to work with any color paint, they contain a permanent clear coat much like the protective outer layer used on new cars from the factory. But what their packaging doesn’t make entirely clear is that these pens are strictly for surface scratches in the clear coat. If the damage goes into the paint below, you’re out of luck.

We also found that the pens can be tricky to use, and that it’s not easy to get the thin, even line necessary to neatly fill scratches without overdoing it. With applicator tips that are as wide or wider than a typical scratch, our sampled products make it difficult to avoid applying too much filler, and leaving a visible residue that’s more noticeable than the damage you’re trying to repair. And getting rid of that residue might require sanding and buffing it out, and potentially some touch-up paint.

How we tested

For our evaluation, we used the same lab-grade black test panels we purchase for car wax testing. These panels are painted and clear coated with automotive finishes. We also tried them on two vehicles with light scratches: a silver Toyota Sienna minivan owned by Consumer Reports and an employee’s dark blue Honda CR-V.

We made scratches in the test panels with a key and the end of a bolt, and then used the products according to manufacturers directions on both the panels and the pre-scratched vehicles. This involved washing and drying the damaged area, shaking the pen to mix the contents, dabbing the tip on a piece of paper towel to get the product flowing, and carefully drawing the pen along the surface of the scratch. After applying the products, we moved the samples to the roof of our building where they were allowed to weather for four weeks.

The results

All three of the products filled the scratches, and we saw no appreciable difference between them in either ease of use or effectiveness.

From certain angles, the repairs looked just as good as advertised in the TV ads. But other angles revealed a ridge of very noticeable excess clear coat. The results had the look of an amateur job, at best, and often the repair was far more noticeable than the original scratch. The Simoniz and DuPont products advise wiping off any excess with a paper towel, but we found this only made things look worse, as it smeared the paint across the undamaged surface.

Our advice is to save your money and skip these quick fixes for minor abrasions or try a cleaning polish instead.

Read more »

Repair OnagoFly

How about repair OnagoFly, not yet for this session see

If you are caught without a registration flying your drone, you can face penalties up to $27,500.

Ignorance is no excuse for skirting laws too, so don’t expect to get away with the law by thinking your drone is a toy.

The ONAGOfly was a drone I checked out at CES 2016, and is the perfect drone for most enthusiasts. It is full featured, and is already fully funded on Indiegogo with over 6,000 backers and $1.5m in funding. The ONAGOfly is a palm-sized drone weighing in at just .3lbs and is not required to be registered with the FAA. You will not face any legal actions if you get caught flying this drone without proper registration.

Like drones three times its size, you can take photos and videos while being able to fly it right out of the box. The ONAGOfly will have an app available for Android devices, and can be flown for an average of 15 minutes with GPS capabilities. It will also have the camera features built into the drone so you will not have to pay extra for those features.

“We’ve created a drone for everyone,” says ONAGOfly Sam Tsu. ”ONAGOfly can be used by anyone, and its opportunities are endless. This product is great for athletes, travelers, and drone-lovers; people who want to capture their lives and loved ones from above. We are looking forward to launching ONAGOfly on Indiegogo, to show backers what we’ve created and hear how they can use the device in their adventures. We are just want happy backers and to create a well-known brand in the nano drone space.”

There are still three weeks to get in on the crowd funding project and you can get a ONAGOfly for just $199, with two extra propeller sets and one charger. The drone is expected to ship in March of 2016. If you wait until after the Indiegogo project ends, you will have to pay $299 on pre-order starting in February.

Read more »